Shane3Fan
12-05-2004, 08:44 AM
im restarting my 1988 Monte Carlo SS "Black Widow" project and have a bunch of stuff i need to sell in order to finance the project.
PM me for prices and details.
one set of vortec GMPP heads, less than 1,000 miles on them.
one set of SBC 882 casting heads, need valve job and resurface.
one vortec edelbrock performer intake.
one 1 inch torque swirl carb spacer
one holley 3310S 750 vacuum secondary carb, freshly rebuilt and tricked out. not run since. has metering plate on secondary side, also has adjustable secondary diaphragm housing.
one set Taylor solid core spark plug wires, VERY good condition, red in color.
one comp cams 280H camshaft, low miles-with hydraulic lifters.
one set 305 HO cylinder heads, fresh valve job and resurface, comp cams valve springs, retainers and new guides.
1998 corvette tilt/telescoping steering column, no steering wheel, new in GM box.
1988 Monte SS wheels (4) very good condition, no dents or damage, clear coat peeling in few small places, available with or without BF Goodrich 245/60 R15 tires that have less than 1,000 miles.
1970 el camino body parts, PM for details. It was an SS.
1980 Honda Twinstar 200 motorcycle. 5,500 miles. brand new tires, tune up and in VERY good shape, garage kept.
1989 S10, 65,000 original miles, AWESOME condition, needs paint (roof peeling) White in color.
2004r Trans, freshly rebuilt and not run. has billet servo and GNX valve body. Should be nearly bullet-proof.
B&M 2400 stall non-lockup hole shot converter for 200-4R or 700R4.
mallory mechanical fuel pump (forget the part number but it is the rebuildable one) never installed.
mallory 110 electric fuel pump--never run.
350 4 bolt main block. from a 1980 chevy ambulance. slight rust in cylinders, would need to be bored.
1993 LT1 camshaft
chrome GMPP SBC Timing cover
chrome centerbolt valve covers with red bow ties made into them. from a 300 horse 350 crate engine.
multiple CCC quadrajet carbs and one non computer controlled quadrajet
square bore holley 650 carb--in pieces-not sure of model number
stock 1988 monte carlo ss ECM
lots of 1/24th and 1/18th scale die cast cars--pm for details.
2003 snap on RCR special edition tool box/work station. ( S9500.00 FIRM ) like new, cost 11 grand a year ago. color is called candy apple red, and it was a limited edition tool box--its aprox 7 feet long and 8 feet tall. comes with a custom snap on zip up cover and stainless steel top.
(4) corvette rally wheels--no bands or center caps.
stock 1988 monte carlo ss hood-very good shape-ready for paint--was black.
26 year old wife, been together 10 years, might include with another item purchased LOL, just checking to see if you made it this far...wouldnt sell her for a zillion dollars.
factory 3.73 monte carlo ss non-locker rear diff--perfect condition.
drum brakes off of 1988 monte carlo ss
stock exhaust manifolds and y-pipe from 1988 Monte Carlo SS--very nice--will include EMPTY catalytic converter as well if youd like it.
(2) hooker mufflers for 2.5 inch exhaust-less than 1,000 miles--they are currently welded to pipes and turn downs for dual exhaust that ends in front of the rear diff. can be cut off or left alone.
right inner fender for 1988 monte carlo ss
one set of vortec heads with a burnt vlve--needs valve job and resurfacing.
picture of tool box if anyone is interested. it comes with a very nice snap on zip-up cover
http://www.mnrl.net/forum/files/tool-box-pic-for-web.jpg
PM me for prices and details.
one set of vortec GMPP heads, less than 1,000 miles on them.
one set of SBC 882 casting heads, need valve job and resurface.
one vortec edelbrock performer intake.
one 1 inch torque swirl carb spacer
one holley 3310S 750 vacuum secondary carb, freshly rebuilt and tricked out. not run since. has metering plate on secondary side, also has adjustable secondary diaphragm housing.
one set Taylor solid core spark plug wires, VERY good condition, red in color.
one comp cams 280H camshaft, low miles-with hydraulic lifters.
one set 305 HO cylinder heads, fresh valve job and resurface, comp cams valve springs, retainers and new guides.
1998 corvette tilt/telescoping steering column, no steering wheel, new in GM box.
1988 Monte SS wheels (4) very good condition, no dents or damage, clear coat peeling in few small places, available with or without BF Goodrich 245/60 R15 tires that have less than 1,000 miles.
1970 el camino body parts, PM for details. It was an SS.
1980 Honda Twinstar 200 motorcycle. 5,500 miles. brand new tires, tune up and in VERY good shape, garage kept.
1989 S10, 65,000 original miles, AWESOME condition, needs paint (roof peeling) White in color.
2004r Trans, freshly rebuilt and not run. has billet servo and GNX valve body. Should be nearly bullet-proof.
B&M 2400 stall non-lockup hole shot converter for 200-4R or 700R4.
mallory mechanical fuel pump (forget the part number but it is the rebuildable one) never installed.
mallory 110 electric fuel pump--never run.
350 4 bolt main block. from a 1980 chevy ambulance. slight rust in cylinders, would need to be bored.
1993 LT1 camshaft
chrome GMPP SBC Timing cover
chrome centerbolt valve covers with red bow ties made into them. from a 300 horse 350 crate engine.
multiple CCC quadrajet carbs and one non computer controlled quadrajet
square bore holley 650 carb--in pieces-not sure of model number
stock 1988 monte carlo ss ECM
lots of 1/24th and 1/18th scale die cast cars--pm for details.
2003 snap on RCR special edition tool box/work station. ( S9500.00 FIRM ) like new, cost 11 grand a year ago. color is called candy apple red, and it was a limited edition tool box--its aprox 7 feet long and 8 feet tall. comes with a custom snap on zip up cover and stainless steel top.
(4) corvette rally wheels--no bands or center caps.
stock 1988 monte carlo ss hood-very good shape-ready for paint--was black.
26 year old wife, been together 10 years, might include with another item purchased LOL, just checking to see if you made it this far...wouldnt sell her for a zillion dollars.
factory 3.73 monte carlo ss non-locker rear diff--perfect condition.
drum brakes off of 1988 monte carlo ss
stock exhaust manifolds and y-pipe from 1988 Monte Carlo SS--very nice--will include EMPTY catalytic converter as well if youd like it.
(2) hooker mufflers for 2.5 inch exhaust-less than 1,000 miles--they are currently welded to pipes and turn downs for dual exhaust that ends in front of the rear diff. can be cut off or left alone.
right inner fender for 1988 monte carlo ss
one set of vortec heads with a burnt vlve--needs valve job and resurfacing.
picture of tool box if anyone is interested. it comes with a very nice snap on zip-up cover
http://www.mnrl.net/forum/files/tool-box-pic-for-web.jpg